探火管灭火装置控制要求 Fire pipe extinguishing device control requirement 间接式探火管灭火装置应有自动控制和机械应急操作两种控制方式；直接式探火管灭火装置可采用自动控制一种方式。 The two kinds of control methods of automatic control and mechanical emergency operation should be controlled by indirect fire pipe extinguishing equipment. Direct fire tube extinguishing equipment can be controlled by automatic control. 探火管灭火装置动作时，应提供灭火装置释放信号；当设有消防控制室时，宜提供有关信号给消防控制室。 To fire the fire extinguishing device, the fire extinguishing device shall be provided. When there is a fire control room, the relevant signals are provided to the fire control room. 安全要求应符合现行国家标准《二氧化碳灭火系统设计规范》GB 50193、《气体灭火系统设计规范》GB 50370和《干粉灭火系统设计规范》GB 50347的规定。 Security requirements should be consistent with existing national standards "carbon dioxide extinguishing system design specification" GB 50193, the gas fire extinguishing system design specifications GB 50370 and the dry powder extinguishing system design specifications GB 50347.