厨房自动灭火装置的保养内容是什么？
What is the maintenance content of kitchen automatic fire extinguishing device?
1、解除灭火安装启动控制安装，拆卸高压动力瓶，并称重检测。
1. Remove fire extinguishing installation, start-up control installation, remove high-pressure power bottles, and weigh and test.
2、检查灶台上方每个感温元件，并停止调整。
2. Check each temperature sensor above the stove and stop adjusting.
3、拆卸灶台上方及排烟口位置的雾化喷嘴停止检查、清洗。
3. Remove the atomizing nozzle above the stove and at the position of the smoke outlet to stop checking and cleaning.
4、改换雾化喷嘴防护胶帽。
4. Change the protective rubber cap of atomizing nozzle.
5、改换曾经老化的零部件。
5. Replacement of old parts.
6、调试手动启动安装。
6. Debug and start installation manually.
7、调试自动监控机构，用模仿感温元件替代易熔片启动安装，控制系统应动作灵活无卡滞现象，确保厨房设备灭火安装正常工作。
7. Debugging the automatic monitoring mechanism and replacing the fusible sheet with the imitation temperature sensor. The control system should be flexible and no sticking phenomenon to ensure the normal operation of kitchen equipment fire extinguishing installation.
8、各零部件检测合格后复位，厨房设备灭火安装进入正常工作状态。
8. All parts are reset after qualified testing. Fire extinguishing installation of kitchen equipment enters normal working state.
9、即时维修：当发作毛病而业主值班人员又无法扫除时，电话通知有关人员前往维修。
9. Instant Maintenance: When there is a problem and the owner's on-duty personnel can not clean it up, the telephone informs the relevant personnel to go to the maintenance.
10、清洗厨房灭火安装。
10. Clean kitchen fire extinguishing installation.